Home

Greenhouse and Energy Minimum Standards (Ballasts for Fluorescent Lamps) Determination 2012

Policy Details

Greenhouse and Energy Minimum Standards (Ballasts for Fluorescent Lamps) Determination 2012
Source
Ballasts for fluorescent lamps manufactured in or imported into Australia or New Zealand must comply with Minimum Energy Performance Standards (MEPS) requirements which are set out in AS/NZS 4783.2.MEPS DOES apply to the following types of ballasts: ferromagnetic and electronic ballasts used with linear fluorescent lamps from 15W to 70W; rated for 50 Hz and 230/240/250V supply (or a range that includes these); ballasts supplied as separate components or as part of a luminaire. MEPS DOES NOT apply to the following types of ballasts: primarily for use on DC supplies or batteries; primarily for the production of light (radiation) outside the visible spectrum; to exit signs within the scope of AS/NZS 2293; to hazardous area lighting equipment within the scope of AS/NZS 2380 AS/NZS 60079 and AS/NZS 61241. "

MEPS DOES NOT apply to the following types of ballasts: primarily for use on DC supplies or batteries; primarily for the production of light (radiation) outside the visible spectrum; to exit signs within the scope of AS/NZS 2293; to hazardous area lighting equipment within the scope of AS/NZS 2380 AS/NZS 60079 and AS/NZS 61241.

See more
Download the data
Asia and Pacific
Australia
Mandatory
Comparative Label
Minimum Performance Standard
Show Label
Entered into force , Adopted & Revised
Adopted
Revised
Updated by CLASP
Department of Climate Change and Energy Efficiency (DCCEE)
AS/NZS 4783.1:2001

Fuel Types

Electricity

Related Topics

Energy Efficiency

Products Covered

Fluorescent and HID Lighting

Related Information